Great Products, Great Prices!
When you receive your cutter, open the box from the top being careful not to penetrate the box with a razor blade so as not to scratch the contents inside. The banding straps will need … Continue Reading →
Improve your vinyl cutter tracking. Continue Reading →
As many of our clients are aware, vinyl cutting is easy. Most of the time and effort involved in the creation of a custom decal is spent with cleaning up artwork or, if the decal … Continue Reading →
The process of ARMS cutting is simple however, there are some important points that you will need to be aware of. 1) The first step is to create your contour outline with registration marks. The … Continue Reading →
Although you can use virtually any artwork to vectorize with InkScape and cut with your vinyl cutter, the extended characters of font sets are perhaps some of the most readily available sources of good quality … Continue Reading →
There are many types of transfer tape to choose from. When choosing transfer tape, keep in mind the following points: Tact – Your transfer tape should have a tact that will easily remove the vinyl … Continue Reading →
Your vinyl cutter operates based on a drag knife system. This means that the actual cutting that your blade is doing happens behind the centerline of rotation of the blade shaft. Your blade holder restrains … Continue Reading →
Following are some of the important points you should be aware of for your ProCut Contour or Servo vinyl cutter system manufactured by Saga CNC. Your vinyl cutter should be electrically connected to the stand. … Continue Reading →
As a continuation of the post “Font Cleanup Before Sending Artwork To A Vinyl Cutter“, Dan submitted the final result of his race car graphics for Bigg Dawgg Graffix. See picture below. This was produced … Continue Reading →
When it comes to choosing between a stepper motor vinyl cutter and a servo motor vinyl cutter there are several points of consideration. Before jumping into these points, it is important to have an understanding … Continue Reading →