Great Products, Great Prices!
Your vinyl cutter operates based on a drag knife system. This means that the actual cutting that your blade is doing happens behind the centerline of rotation of the blade shaft. Your blade holder restrains … Continue Reading →
Following are some of the important points you should be aware of for your ProCut Contour or Servo vinyl cutter system manufactured by Saga CNC. Your vinyl cutter should be electrically connected to the stand. … Continue Reading →
As a continuation of the post “Font Cleanup Before Sending Artwork To A Vinyl Cutter“, Dan submitted the final result of his race car graphics for Bigg Dawgg Graffix. See picture below. This was produced … Continue Reading →
When it comes to choosing between a stepper motor vinyl cutter and a servo motor vinyl cutter there are several points of consideration. Before jumping into these points, it is important to have an understanding … Continue Reading →
Although InkScape can produce many file types and Flexi can read in many file types, Flexi cannot read in InkScape native files directly. InkScape native files are SVG (Scalable Vector Graphic) files. The most consistently … Continue Reading →
Again referencing my sessions with Dan this weekend, when we made the numbers for his racecar we used a font that actually had some bumps in the sides of the letters. These indentations looked to … Continue Reading →
I had the pleasure of assisting Dan today and yesterday as he was doing offsets in InkScape to create vinyl overlaid numbers for his racecar. When we went to cut out the numbers we ran … Continue Reading →