Bigg Dawgg Graffix Racing Decal Cut On A ProCut Contour 4800 Using InkScape And Flexi Starter

As a continuation of the post “Font Cleanup Before Sending Artwork To A Vinyl Cutter“, Dan submitted the final result of his race car graphics for Bigg Dawgg Graffix. See picture below. This was produced with a Contour 4800 using InkScape for graphics generation and Flexi Starter 10 for sending the graphics to the cutter. This is an excellent example of the effect one can achieve with layering as it is very well executed with this example. Vinyl color selection is important to achieve the bright contrast that Dan has with this decal.

Example of Layered Vinyl Using a ProCut Contour 4800, Flexi Starter and InkScape

Example of Layered Vinyl Using a ProCut Contour 4800, Flexi Starter and InkScape

If you need assistance generating layered graphics as depicted above, please contact us at http://www.CutterPros.com

Leave a Comment